The tires serve a few important primary functions, such as:

* Act as a buffer / cushion between you and the road, for a comfortable ride.

* Providing traction and friction when needed.

* Transmit your handling intention.

Here’s some useful tips on checking your motor bike tire pressure:

1. First and foremost, know what is the correct tire pressure for your motor bike – this piece of information can usually be found under the seat of the motor cycle or the user manual provided by the motor bike manufacturer.

2. Using the correct pressure recommended by the motor bike manufacturer is very important. This is in contrast to the information that is stated (by the tire manufacturer) on the tire sidewall, which indicates the maximum pressure allowed for the tire – and it therefore does not take into consideration the other characteristics of your motor bike, such as weight, handling characteristics etc, information which your motorbike manufacturer will know.

Do note that the above information applies to OEM (original equipment manufacturer) tires. If you are not going to use the OEM tires, you will probably have to consult the tire manufacturer for the right tire pressure to use.

3. It is important to check your tire pressure when it is ‘cold’ – meaning it has been in the rested state for at least 3 hours. This is because tire can ‘heat up’ quite considerably, especially when going a high speed.

4. Unlike for cars, which the recommended interval of checking tire pressure is once a month, motor cycle tire manufacturers recommend checking tire pressure of your motor bike at least once a week.

5. Some professionals even recommend checking tire pressures daily, especially if you are going on long a trip. Do note that every 1 psi difference is equivalent to about sixty to seventy pounds of load bearing capacity.

6. Another important factor to consider is that you will have to do a check whenever there is a change in the temperature. A sudden drastic drop in temperature will almost immediately make your motorcycle tires underinflated.

7. Checking your motorcycle tire pressure right before making a long trip is also a good practice.

In conclusion, know the correct tire pressure for your motor bike, make sure that you check and inflate your tires on a regular basis for better fuel efficiency, reduced wear and tear of your tires and most important, safe handling.

Ride safe and be merry.

Wil Yeo is a mechanical engineer by training and owns the site Avanigroup.com: Air Valve Cap from Avanigroup.com – Avani Revolv, Patented Anti-Theft Chrome Valve Stem Caps which features a unique theft deterrent tire pressure valve stem cap product. Maintaining the correct pressure requires the correct tool: the site also provide a section dedicated to tire gauges which can be found here Accutire Tire Gauge Section

If you care about your car and vehicle safety and safety of your family members, you will find the handy guide that is given away FREE on the site very useful, an ebook is entitled: Tire Maintenance Guide which covers various important aspects of maintaining your vehicle tires. It is an eBook not to be missed, whether you are new riders / drivers or season riders / drivers.

Article Source: http://EzineArticles.com/?expert=Wil_Yeo
http://EzineArticles.com/?7-Useful-Tips-That-You-Need-To-Know-About-Checking-And-Maintaining-Your-Motor-Bikes-Pressure&id=483799

*The Reviews
*The Price
*The Features
*How Accurate it is

Listed below are the top 5 that I highly recommend that you check out…

#1 Accutire MS-4350B: This one is one of the best rated gauges on the market. It’s going to run you anywhere from $10 to $15.

#2 Accutire MS-4021B: Another highly rated gauge. You’re going to find that he Accutire brand creates some pretty great products! This one is around $10.

#3 Moros 89560: The first 2 were digital. This one is your typical dial type. It’s a little more in cost, but you’re going to get what you pay for. It’s durable and highly accurate.

#4 Neiko Professional Brand: If you’re into racing, or you’re really into your cars and you want to make sure everything is right, this is the brand for you. It’s around $12, but it’s going to set the bar above the rest.

#5 Auto Meter 2343: This is the last one on the list. Another dial type, but has nice reviews, it’s accurate, and it’s really easy to store away in your car, because of it’s smaller size.

5 gauges not enough? I have created a top 10 list of the best tire pressure gauges on the market. Browse through them and see which one works for you!

Article Source: http://EzineArticles.com/?expert=Tom_Tessin
http://EzineArticles.com/?Top-5-Tire-Pressure-Gauges&id=4068339

Range

This gauge can take measurements from 5-99 psi with 0.5 psi increments. While this range might be a bit low as compared to more professional models, it is more than what any average car owner would require.

Hardware

The LCD screen is quite large in size and is backlit, which makes for easy reading even in the dark. It is shaped ergonomically and is very easy to grip. The Accutire digital tire gauge weighs just 4.3 oz and measures 6×1x1 inches.

Besides, it also includes an LED light that can be activated at the switch of a button. Perfect for dim light conditions, as can be case when working underneath cars.

Features

The Accutire digital tire gauge is fully programmable. This means that it can be pre-loaded with settings recommended by your car manufacturer. This can help you save a lot of time and effort.

Warranty

Each device comes with a 5 year manufacturer’s warranty

In terms of features, the Accutire digital tire gauge provides plenty for the average car owner. While the psi measurement range could be a bit more so as to compete with more professional models, you’ll hardly exceed this range in normal day-to-day driving. It is small in size and very lightweight and can be tossed easily into the glove compartment. The large, backlit LCD screen can be a blessing in the dark or in bad weather conditions.

Last, but not the least, a 5 year manufacturer’s warranty gives you a large safety net should the device malfunction.

Another little feature of the Accutire digital tire gauge is that it doesn’t have to be pushed on or off. The reading is displayed automatically when you push it into the tire valve. Moreover, the device notifies you when a correct reading has been taken by beeping automatically, which makes working with cars just a tad bit easier.

To conclude, the Accutire is a highly accurate, high quality digital tire gauge and would be a perfect fit in any car owner’s tool box.

Visit my site to do further research about digital tire gauge and get some great buying tips.
Digital Tire Gauge

Article Source: http://EzineArticles.com/?expert=John_Newcomb
http://EzineArticles.com/?Accutire-Digital-Tire-Gauge-Review&id=2989357

It is fact that a vehicle having lesser air pressure in tires can not give you exact mileage. This will so waste a lot of fuel resulting in wastage of your hard earned money. Therefore, if you want to enjoy smooth driving with fuel conservation, you are required to keep the pressure of the tires of your vehicle at reasonable level.

Best way to check the air pressure in tires of your vehicle is to check it with the help of different pressure measuring instruments. Presently, two types of gauges are available in the market to check the air pressure in tires of your vehicle. One is analog type of devices which can be used to judge the pressure of air in tires. These kinds of manual devices are under use for many years and are working properly. However, they cannot be a match for highly sophisticated digital instruments.

The other type of gauges for measuring pressure of air in tires of your car includes digital equipments. These highly advanced equipments are made with sophisticated technology using electronic chips and sensors. The sensors feel pressure and convey it to the electronic system which with the help of already programmed software sends the result in the display screen. So you can note the reading from this display screen very easily.

Further, this reading depicts actual and exact air pressure in tire of your vehicle, which will be of great help to keep the vehicle in road worthy condition for long timer. Further, it will also let you enjoy smooth driving along with saving a lot of money on fuel cost.

Actually when you drive any vehicle with low pressure in tires, the engine needs to work hard. This increased working of the motor engine requires additional fuel. Thus a vehicle with lesser air pressure in tires consumes more fuel as compared to that which has sufficient air pressure in its tires. Also due to increased load on engine, you will have to invest on service and repair of engine of your car. Thus the digital pressure measuring instrument help you maintain the exact pressure in tires of your vehicles resulting in ultimate saving a lot of money for you.

If you are interested to know more about digital height gauge and digital tyre pressure gauge please visit our website.

Article Source: http://EzineArticles.com/?expert=Nazima_Golamaully
http://EzineArticles.com/?Amazing-Digital-Devices-For-Checking-Air-Pressure-in-Tires&id=4738272

Tires support the weight of the vehicle chassis off the ground. They help absorb shocks from the road surface. They transmit traction and braking forces to the road surface and change or maintain your direction of travel. Your tires control steering, stopping, position and acceleration – all the major safety factors. This is not an area to skimp on or neglect.

Tires are even more important to the group of cyclists that do touring. The longer distances and typically heavier loads increase the chances of failure. Do you know what your bikes load capacity is? Do you know how much your bike weights if you are riding two up with cargo?

Tires are abused more often than any other system on your bike. They have to stand up against extremes in temperature, exposure to the elements, potholes, and debris on the road. Now add incorrect inflation and overloading, wheel spin, lockup, a significant amount of straight road driving, and you can understand how important it is to monitor your tires. The National Agenda for Motorcycle Safety as assembled by the Motorcycle Safety Foundation (MSF) states that tire punctures are the major cause of all the vehicle failures that result in a crash.

The air inside of the tires carries the weight of the motorcycle, not the tires themselves. The tire’s ability to hold air pressure, the amount of air pressure, and the amount of space between the tire and wheel available to hold the air, determines what a tire can support. It is very important to follow the manufacturer’s instructions for load and inflation. Your owner’s manual will guide you on load limits of your bike’s chassis and suspension, and the sidewall of your tires will have inflation information. This information can also be found on the VIN plate, which is usually near the steering head.

Slow leaks can result in blowouts. Conscientious bikers know that tire pressure should be checked during your pre-ride inspection. Tires have to be checked when they are COLD. Even if you ride a mile, they will heat up and show a higher pressure. Wait one hour if you have been riding your bike. Make sure that the stem cap is on tight. Centrifugal force may open the valve inside the stem.

It is also very critical that your tire gauge be accurate. How do you know if it is? The best way is to compare with several people at the same time. If you all measure the same tire, you can compare how your gauges read. Some gauges have flashlights; some have sound so that you can check your tires in the dark. Other factors are large display, digital read out. Use a top quality gauge. Never bleed air out of a hot tire!

When tires are under inflated they have to flex more when the tire flattens to meet the road. This causes excess heat and premature tire wear. It could also cause a catastrophic failure. A tire can also rotate (slip) on the wheel. If you are using tube type tires, this can cause the valve stem to be pulled from the tube.

In addition to checking inflation with an accurate gauge, observe the tire’s overall appearance. If you notice tread groove stress cracks, sidewall cracks, blisters, bulges, uneven wear, cuts, punctures, flat spots and knots – replace the tire! It cannot be repaired. If you are unsure, call the manufacturer. Do not rely on wear bars. How does the bike feel when you are riding it? Is there a change? Is it difficult to steer? Vibration and wobble are very serious and you should stop immediately.

Trailers can cause problems with your tires in addition to handling problems. The extra weight of the trailer tongue combined with quick starts and stops put too much stress on the back tire and can cause it to fail. At best, you should be sure the load rating is up to the task and expect accelerated wear on the rear tire. Some accessories can increase load as well, so you should consider the cumulative weight of all of your bolt-ons.

Dunlop recommends the following guidelines:

For touring motorcycle loading

A. Light loads-single rider with some luggage (up to 200 lbs total) – minimum tire

pressure of 32 psi front and 36 psi rear must be maintained.

B. Heavier loads-dual riding and/or luggage (from 200lb. Total up to maximum

motorcycle capacity stated in the owner’s manual – pressure of 36 psi front and

40 psi rear must be maintained.

For any dual riding or fully loaded use, 40 psi must be maintained in all Dunlop rear tires fitted to touring motorcycles.

When you decide to replace your tires, keep these factors in mind. Do not use maximum power, do abrupt lean overs or extreme corning until you have ridden at least 100 miles. Let the tire cool for three hours and then check inflation pressure. This allows you to get use to the new feel and handling of the bike. New tires will have a different lean over edge. If you have only replaced one tire, use caution until you have tested the handling.

Make sure that you have your tires balanced, and rebalanced any time that a tire is removed.

Motorcycle tire repairs leave no room for error and should be done by a professional. Tire repair should be done from the inside only, with the tire off of the wheel. You should not go more that 50 miles per hour for the first 24 hours and never go 80 or above. The wheel must still be in good condition, not bent or cracked, and the general condition of the tire must be good with no cracks. The tire should have at least 1/32 of an inch of tread depth excluding tread wear indicators. Never repair a punctured tire with a tube. Dirt and moisture will enter the tire and can cause the tire to come apart. Do not use a tire sealant. After the repair, the valve assembly should be replaced and the tire/wheel rebalanced.

Use only a mild soap to clean your tires. Do not store them in sunlight, near electrical motors or where they can be exposed to gas and oil.

We all know that bike tires can be expensive. And if you ride a heavy cruiser or tourer, or a sport bike with a penchant for the soft sticky ones they seem to burn up altogether too quickly. However, if you seriously consider the consequences, choosing not to replace worn or damaged tires can be painfully more expensive.

Trish Fink and her husband Chuck have a BMWK1200LT that takes them on adventures through the countryside on twisty, windy country roads. Chuck has been riding motorcycles for 35 years, starting with dirt bikes. Trish is the back seat biker. Our business, Two Wheel Touring, is dedicated to encourage safe biking practices, including protective gear and gadgets. For additional motorcycle riding articles and more, visit our web site http://www.2wheeltouring.net

Article Source: http://EzineArticles.com/?expert=Trish_Fink
http://EzineArticles.com/?Motorcycle-Tire-Care-and-Maintenance&id=5033389

Of all these digital pressure gauge variety, the air gauge one is the most popular and is indispensable to a vehicle owner. They provide accurate and precision measurements in digital format, unlike in analog gauges where the results are displayed through dials and numbers. They are excellent devices that help to determine the air pressure in tires. And interestingly it works great for all kinds of tires right from a bicycle to trucks.

This digital gauge variety usually has a sliding ball on the tip that appears while inspecting air pressure. This ball serves as a piston that restrains air from a tire while inserting it into a tire valve. When determining the measurement, it slides out, and you will observe the pressure of the tire inside. And the numbers would be shown digitally on an LCD/small screen. The digital air gauge can be used to inspect the tires before you are planning for a long ride and so on. This ensures both safety and hassle free riding in the long run.

It is to be mentioned here that not all tires require the same pressure. It differs from vehicle to vehicle (depends on the size of the tires and the weight of the vehicle). So, this is something which should be kept in mind while checking the pressure in individual tires using a digital pressure gauge. Normally, air pressure is determined in PSI i.e. pounds for every square inch. And incidentally, most vehicles have tire that weighs 30 to 40 pounds. And most of the times, the pressure requirement is written at the side wall of the tire, or beneath the door near the fuel compartment.

Always take care to examine your tires carefully, so that you have well inflated tire for cost-effective fuel consumption. Also see to it that they are not over inflated, which may sometimes result in their bursting. And all this is possible to be prevented if you make the right use of your air digital gauge.

However, to get the optimal benefit from your digital pressure gauge, it is important that you always keep it in a cool and dry place while in storage. Maintain it properly and see that it never falls which may affect the overall performance of the device.

Genelia Winslet is Expert author in making articles for business, digital pressure gauge, Ecommerce, digital multimeters, shopping and infrared thermometers etc. I have made many articles on Temperature Measurement devices too.

Article Source: http://EzineArticles.com/?expert=Genelia_Winslet
http://EzineArticles.com/?Digital-Pressure-Gauge-That-Measures-Air-in-Automotive-Tires&id=5156265

I wanted to list a few that you may want to check out, when you’re ready to make a purchase…

#1 Accutire MS-5510B – Accutire is one of the best brands when it comes to gauges. What you’re going to find out with these is that they get some killer reviews online and the designs are simply awesome. This really accurate gauge is going to read to the.01 increment, making it extremely accurate.

#2 Accugage SX Series -This one is going to set you back about $12 or so. It’s just like any other gauge but it isn’t digital. Some people like the older based ones, while others like the newer technology because it gives them a good reading. It’s up to you to decide on what you want.

#3 Neiko Professional Heavy Duty – This is one of the best rated gauges on the market. Again, it’s not technological, but it will get the job done. It measures from 10 to 160 PSI, with 2 lbs increments. It also feature a 2″ dial display.

These are three that you may want to look into. There are more than these but what you’re going to find out is that these are by far, the best rated online.

Check out my top 10 tire gauges list. I will show you what I think is the best racing tire gauge on the market today for your car.

Article Source: http://EzineArticles.com/?expert=Tom_Tessin
http://EzineArticles.com/?Racing-Tire-Gauge—Picking-One-Out&id=4062720

An under inflated tire can experience excessive side wall flexing which results in high heat generation in a short time and reduction in load carrying capacity. Under inflation also leads to a reduction in fuel economy. Inflating your tires to the maximum pressure specified on the tire side wall can extend tire life and improve your fuel economy.

It is not possible to ascertain whether a tire has the correct air pressure just by looking at it. This is especially true with radial tires.

The best time to check tire pressure is in the morning. Use a good quality air pressure to check your tire at least every two weeks and before any long trips. Always check the pressure when the tires are cool (if the vehicle has been driven less than 1.5km). If the car has been driven, allow the tires to cool for a few hours before checking the pressure. Do not bleed or reduce tire pressure when tires are hot. A tire air pressure will automatically increase as its internal temperature increases. This increase is normal and should not be adjusted.

Tire pressure should be increased when your car is carrying extra weight, such as on a vacation trip. An increase of 4psi (28kPa) over the car manufacturer’s recommended cold tire pressure is usually sufficient. Remember, check and adjust inflation only when tires are cool.

Be sure the valve caps are screwed down finger-tight. Valve caps should have a rubber seal to provide a secondary air seal and keep dirt and moisture out of the valve core. A new valve assembly should be installed whenever a tire is placed.

If the valve caps are not in place, fine particles of sand may get trapped in the valve openings and air would leak out slowly through the small tiny holes causing possible tire failure over a period of time

Car related issues and information William’s automotive blog.

William C has been in the automotive industry since 1995 and brings with him vast experience, practical solutions and layman issues on cars and related Automotive Issues. Often referred as the “car man” among his peers. He offers defensive driving techniques and safety driving on a one to one basis. Consultant by emails on driving ways and sorts. Look for him for good repair shops and money saving insider secrets.

William’s Car Issues William’s automotive blog.

Article Source: http://EzineArticles.com/?expert=William_Chong
http://EzineArticles.com/?How-Much-Air-Pressure-is-Needed-in-the-Car-Tires?&id=1621123

There are primarily four important areas to your tire maintenance: Tire Pressure, Vehicle Alignment, Tire Rotation and Tire Tread.

This article focuses on tire pressure and the importance of having good tire valves and tire valve stem cap.

Tire Pressure

Why and how does tire lose pressure?

Tire basically losses pressure through the lost of air. This is mainly through the air permeation both from the rubber body as well as natural leakages through various parts of the tires. The other factor that affects tire pressure is temperature – generally, a drop in temperature will result in ‘lost’ of pressure. As a rule of thumb, the tire losses 1 psi for every 5 degree Celsius drop in temperature.

How do you know the correct tire pressure for your car’s tires?

* The information is usually provided by your car manufacturer. You can usually find the information at the owner’s manual, inside of your glove box, or at the doorjamb.

How to tell whether the tire pressure is at the correct level?

* The best way to know if your tire pressure is at the correct level is by using a tire pressure gauge. There are digital tire pressure gauge available in the market that can be very handy and tells the tire pressure accurately. DO NOT not rely on visual inspection to gauge the tire pressure as it is often inaccurate.

How frequently should you check your tire pressure?

* The recommended checking interval is once a month or earlier.

Tire Valve

The tire valve allows air to be pumped into the tire and the one way valve holds the air within the tire.

Tire valve is essentially a component that is supplied together with the tire by the tire manufacturer and generally made of rubber material. It can deteriorate over time and thus reduces its effectiveness in keeping the the air remain in the tire pressure. When the vehicle is going at high speed, a tire valve that is deteriorated can actually bend as a result of centrifugal force and thus resulted in possible air loss. For safety reason, it is recommended that they are replaced when new tires are bought.

Tire Valve Stem Cap

The tire valve stem cap is also an important component. High quality and properly designed tire valve stem cap usually comes with rubber seal that will help to hold the air pressure within the tires. They can be very critical especially in the event that the tire valve fail and the tire valve stem cap can double up as a leakage prevention backup system.

The other main function of valve cap is that it can keeps out dirt and dust contaminants from the road, which could potentially affect the proper functioning of the tire valve and result in air loss. Air tight tire valve stem caps also keeps out water content and air moisture, which, during the cold season, could freeze and solidify and thereby pose a problem to the tire valve and causes air loss.

There are primarily four types of Tire Valve Stem Cap in the market, they are i) normal plastic material, ii) metal decorative type, iii) with built-in pressure gauge and lastly iv) anti-theft. (please visit Tire Pressure Valve Cap and Overall Tire Maintenance – Why Is It Important For Your Vehicle Safety for more detail descriptions of these 4 types of valve caps available in the market.)

Wil Yeo is a mechanical engineer by training and own the business and the site Avani Revolv Anti Theft Tire Pressure Valve Stem Caps which features a unique patented anti theft tire pressure valve stem cap product. There site also gives away a handy guide entitled: Tire Maintenance Guide. He can be contacted at wil[at]avanigroup.com.

Article Source: http://EzineArticles.com/?expert=Wil_Yeo
http://EzineArticles.com/?Tire-Valve,-Tire-Valve-Stem-Cap-and-Your-Tire-Pressure—What-Do-You-Need-To-Know-About-Them?&id=396668

When you’re out shopping for your digital tire gauge, make sure that the model you buy has a fairly large, high quality LCD screen. This will make taking readings a whole lot easier. Also, make sure that it is backlit so that you can use it in the dark.

The single purpose of a programmable digital tire gauge is to set the air pressure at your car manufacturer’s recommended settings. If your car company recommends a tire pressure that is not in whole numbers (example: 18.5, instead of 19 or 18), make sure that your chosen gauge model has increments small enough to adjust such a non-whole number pressure. The device itself must be easy to use, not overtly complicated so as to make regular readings a herculean task.

Tire pressure gauges these days come in a variety of shapes and sizes. Make sure to get one that can fit ergonomically into your hands. Sometimes, you may have to use the gauge in harsh weather conditions. A large, unwieldly pressure gauge can be a nuisance in such a situation.

Last but not the least, check the manufacturer’s warranty. Programmable tire pressure gauges can be expensive, so always pick one that has sufficient warranty cover.

Visit my site to do further research about digital tire gauge and get some great buying tips.
Digital Tire Gauge

Article Source: http://EzineArticles.com/?expert=John_Newcomb
http://EzineArticles.com/?Programmable-Digital-Tire-Gauge&id=2971001